To disable threaded txt (1st thing I always do!) takes a reg edit: HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings\OEM\ Under the registry key, create a new DWORD value with value name as SMSInboxThreadingDisabled and set…
GScroll has three bits of functionality. Swipe scrolling, 3D scrolling, and program launching. The first, swipe scrolling, allows you to swipe your finger up and down on the touch area,…
1.Wait for the tap here to customize. 2.Go through the screen alignment 3 skip or set pass word. 4.When it says your done and tap the screen to start WM…
Taking apart your G1 is serious business so read this entire section. If you need to disassemble your G1 you have come to the right place. I would FIRST download…
Monet SSPL (SoftSPL) allows you to flash a special USPL (UpdateSPL). Once you have installed (flashed) the USPL you can flash any Monet ROM updates, i.e. you can flash any…
It is app working like Logitech MX Air (like not the same), so you can control mouse remotely including scroll wheel. GRemote include other features like: - Touchpad for…
Boost TFL3D Performance –> Using Advanced Config, change File system cache to 8mb and file system filter cache to 131072
Tested and works a treat. TF3D is sluggish and prone to long pauses before tweak, much faster afterwards
Boost TFL3D Performance –> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
Much quicker than number 1 on it’s own, now stonkingly fast.
Wake Up on New SMS –> HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <– set to “1” by default. Change value to “0”
The Raphael (and the diamond on 1.93) now ring and vibrate for incoming SMS, so this is not really necessary, but will turn the screen on if that’s what you want (I personally don’t).
Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to “0”
Working correctly
(more…)
This guide will show you how to successfully install a 100GB Toshiba hard drive.
1) Follow the disassemble guide until the back cover on the Shift is removed.
2) Carefully pull back the tape found on the ribbon cable connecting to the hard drive.
3) Pull gently the ribbon cable that connects to the hard drive interface. I used pliers with electrical tape around the pinchers to not scuff/scratch the ribbon cable. The hard drive connector is of LIF type (Low Insertion Force) meaning it’s on there simply by pressure and not secured by any clips. It should slide out easily. (more…)
If you have a MPx200, should to know that the sound with headphones is not pretty good, the bass is missing and the volume power is not much. Here I have a mod solution that makes the phone sounds better then MP3 player 🙂
What you need: