Android 2.3 & 3.0 lockscreens for WM6.5.x
For all WM6.5 users, if you like the new Android 3.0 Honeycomb lockscreen or the "oldset" one (Android 2.3), this is for you :) These lockscreens are maded by Wajk…
For all WM6.5 users, if you like the new Android 3.0 Honeycomb lockscreen or the "oldset" one (Android 2.3), this is for you :) These lockscreens are maded by Wajk…
You will need Window Phone 7 on your device before doing this. You will also need 1 SD Card and 1 SD Card Reader. You will need an Android SD…
If you already flashed your HTC HD2 with Windows Phone 7, seanyuan62 from XDA-Developers have some tricks for you 🙂
Here is the list:
Using the Windows Phone 7 voice controls:
Press and hold the Windows key at the bottom of your screen and you can start talking to your phone. Try saying “Open Calendar”, to see what we mean.
Adding apps to the Start screen:
When you are in the long applications list on your phone pressing on an icon and holding brings up a contextual menu that gives you a series of options, one of which is “pin to start”. Press on this option and the app will be shown on the Start screen.
Add people to the start page:
No it’s not just about adding apps to the start page, but people too. Find them in your contacts book, click on the “pin” icon, and they’ll be added to your Start page so you can speed dial them whenever you need.
Do you like the cool looking theme of Windows 7? Here's the good news, now you can have Windows 7 theme in your Windows Mobile phone. Presented to you here…
morfic at XDA-Developers has managed to overclock Nexus S to 1.2 Ghz! Warning: Rooting/Overclocking your Nexus S may cause unseen damage to your handset. All of this is done at…
First, reboot into your Nexus S bootloader/fastboot mode (Volume + Power Up, or adb reboot bootloader). fastboot oem unlock Then, install this recovery: http://koush.tandtgaming.com/recover...0.0-crespo.img fastboot flash recovery recovery-clockwork-crespo.img Then boot…
Last years HTC was the largest manufacturer of phones with Windows Mobile, but now the power balance in the smartphones industry is changed. Since Samsung has been reported that they…
There is a new project by XDA-Developers called XDA TV. It will feature a variety of short periodic “shows” created by members of the XDA community. Shows can have any…
Notes:
1. All surveys were made on the basis of the TMN Silverbelt firmware B08 and ChinaUnicom ZTE-W x60 firmware B02.
2. If your device bricked, you can try to flash it by original flashers (B05 or B08). I’ve flashed my ZTE Raise hundreds of times – bootloader still alive.
3. ZTE Raise (ZTE-W x60) is differs from TMN Silverbelt by hardware. ZTE Raise have 3.2mpx back camera without flash, front camera for videocalls and have no WIFI. TMN Silverbelt have WIFI, 5.0mpx back camera with flash and have no front camera. ZTE-W x60 is made for ChinaUnicom, and Silverbelt – for Portuguese TMN. You should understand that I have ZTE-W x60. So I can’t test TMN camera and WIFI.
WARNING:
1. Before you flash this ROM, make sure you know how to recover from a non-booting ROM or to original ROM!
2. I accept no responsibility for bricked or network-locked devices or any other problems!
3. Please, read instruction in downloaded package and post below.
4. I strongly recommend first flash phone with TMN’s B08 firmware before using this firmware.
5. After every flashing you MUST perform a hard reset!
Original thread and info – click here.