Main problem: the stylus slot is becoming not tighten enough to retain the stylus, and it slipped out by itself, here I have a solution.
What you need:
- Torx T6 screwdriver
- Super glue
- Piece of paper
Now, first you need to disassemble the back cover:
Second step is to locate the problem – the stlyus is holding by this little piece, but after some time of using it becomes weak.
Here we have to use a super glue and toothpick:
And the final step – pieace of paper, just put it over the glue like this:
Now we have a stylus slot like new 🙂