Comments for Android, Windows Phone 7 and Windows Mobile

Comment on WM6.5.3 28002 custom ROM for ACER F1 S200 by โม. ส.

โม. ส. — Thu, 16 May 2013 06:26:02 +0000

My neotouch s200 stuck at clean boot screen after having problem during upgrading it with usb connection. Tried all hard keys and also bootloading but pc did recognize the connection. Just show that check usb driver folder on pc after liading euu.

Comment on AllWinner A13 Tablets – Custom Android 4.1.1 Jelly Bean ROM by Leland Clyde

Leland Clyde — Tue, 07 May 2013 03:44:37 +0000

my touchscreen has not been working.

Comment on AllWinner A13 Tablets – Custom Android 4.1.1 Jelly Bean ROM by Leland Clyde

Leland Clyde — Tue, 07 May 2013 03:44:07 +0000

which ts driver do I use on a a13.

Comment on AllWinner A13 Tablets – Custom Android 4.1.1 Jelly Bean ROM by Ferdaus Mohd

Ferdaus Mohd — Tue, 07 May 2013 01:43:50 +0000

The download link is broken??

Comment on AllWinner A13 Tablets – Custom Android 4.1.1 Jelly Bean ROM by Maino Silberie

Maino Silberie — Mon, 06 May 2013 16:58:47 +0000

Hey guys bought one of these tablet and thought i would put this rom on it. But it didn’t come with 4.0.4 it actually came with 4.1.1 but i still want this rom on it but how do i root the 4.1.1.
Please answer fast.

Thanks in advance.

Comment on Viber for Windows Phone – now available for download by PocketHacks.com

PocketHacks.com — Sun, 05 May 2013 18:19:54 +0000

Download the latest version of Viber for Windows Phone – voice calls are supported now

Comment on Windows Phone 8 is Running the NT Kernel by Tungo Димитър Нгуен

Tungo Димитър Нгуен — Thu, 02 May 2013 16:17:43 +0000

cooooooooolllll

Comment on AllWinner A13 Tablets – Custom Android 4.1.1 Jelly Bean ROM by Glitch_Neo

Glitch_Neo — Sun, 28 Apr 2013 01:28:17 +0000

Some tablets use the init.sun5i.rc file by writing it into the bootloader,

First time you falsh FaaastJB it will work with a PC mouse if your TS is incorrect – allowing you to at least check root, lsmod and get info from Terminal Emulator, Logcats on bugs)

The Multi touch driver(s) may flash, reboot and work… however on shut down / flat battery the TS will revert back to the TS from the first boot – forced by the bootloaders instructions, and “forgetting” your working configuration. Drivers wont install again at times, it goes through abd cmd, says it writes, re-boots and nothing.

Basically means it would need a custom ROM specially compiled by Toxicro with the “EXACT touch drivers” inserted from a copy of your Original Firmware Dump. There are lots built for certain tablets – freely and generously compiled by Toxicro in his own time (Thanks Dude) – Before flashing please be aware of the dangers of not having a backup image of your Device – 2 tabs may look identical but run different software / drivers / partitions etc )

http://www.techknow.me/forum/index.php?topic=3366.0 Official Techknow HcH forums [ROM DUMP TOOL]

A13 / A10 / WM8850 Analyzer Tool – http://www.techknow.me/forum/index.php?topic=5524.0

Features v1.0:

* Wireless Uberizer / ADB control panel
* LogCat viewer (plus write log to SD function)
* Error LogCat viewer (plus write log to SD function)
* Root Check
* BusyBox Check
* Analyser
* WM Analyser
* Remount FS RW
* IP Config

Please goto http://www.techknow.me/forum/index.php?board=130.0

And read the instructions and advice clearly ~ THEN ~ enjoy 4.1.1 on your cheap Tab – Try the Uberizer (copyright HcH) Brilliant backup/restore modding utility.

Thanks Glitch_Neo (Neal)

**((Its Very Important to Backup – Or have a factory Img for your Device))**

Comment on AllWinner A13 Tablets – Custom Android 4.1.1 Jelly Bean ROM by xgeek

xgeek — Wed, 24 Apr 2013 12:09:27 +0000

Hello again,
I had the post but it seems that It has been removed.
I asked about the possiblity of working this rom on the jxd s9100 or freelander pd60 or mapan mx913. As you know all of these three devices are similar and you could use the same rom for all of them. It is the f900 rom.
By the looks of it, it should work.
Please give a expanded reply.
Is it possible? If not what should I do to make it compatible.
Truly yours & thank you very much
Ps, that is very important work, nice job and keep going!